EvoAirMTEC - R50 (100 - 550 L/S)

EvoAirMTEC R50 is a compact air handling unit with high energy performance. Casing with insulated panels, framework of insulated aluminum profiles and beam frame. Energy-efficient EC fans. Highly efficient rotating
heat recovery with stepper motor operation. Effective filters with a large surface area and high filter class. User-friendly integrated control equipment with high functionality.
The R-series, an innovation in installation technology
The innovative design of the unit provides a variety of connection variants.
Supply, from, outside and extract air each have two connections.
You can, for example, use two connections for exhaust air by using both exhaust air nozzles. However, supply air can only be connected to a pipe, as the duct battery can only be connected to a supply air duct.
The same unit can therefore be top-connected, side-connected or L-connected.
An example is that only exhaust air is connected at the top and other ducts are connected at the side.
The connections that are not used are covered with the supplied cover.
Determine the connection type
Right variant = Supply air to the right. (delivery standard)
 
Change parameter 100 to lower, i.e. the left (lower) fan should be supply air fan.
Decide which connections should be used at the top and side respectively, the others are covered with the supplied cover.
Install duct coil for heating and possible cooling in the supply air duct and any dampers in the outside air/exhaust air duct. Cooling coil must be mounted in a horizontal channel due to condensation trough.
Mount the marked temperature sensors in the respective duct, supply, extract, outside air.
Green = Outside air
Blue = Supply air
Yellow = Exhaust air
Brown = Exhaust air